Marvin Yacht – 3D Printing Time-lapse

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Marvin Yacht https://www.thingiverse.com/vandragon_de https://www.thingiverse.com/thing:2884679 Ultimaker 3 Red PLA 5hrs 25mins X:53 Y:98 Z:60mm .2mm layer / .4mm nozzle 30% Infill / 6.5mm retract 210C / 60C…

Multipurpose Castle – 3D Printing Timelapse

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Multipurpose Castle Planter By: 3dprintbase https://www.thingiverse.com/thing:2933230 Ultimaker 3 PLA 15hrs 53min X:110 Y:100 Z:89mm .2mm layer / .4mm nozzle 20% Infill / 6.5mm retract 210C /…

Predator Action Pliers – Time-lapse

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Predator Action Pliers https://www.thingiverse.com/ecoiras https://www.thingiverse.com/thing:2917515 Ultimaker 3 Blue / Gray PLA 7hrs 27mins X:149 Y:149 Z:17mm .2mm layer / .4mm nozzle 20% Infill / 6.5mm retract…

Revisit the Robo R2 3D Printer – Second and Third Impressions Update

The first Robo 3D R2 3d printer I had wasn’t able to print well, and kept jamming. I was sent a second, but that had a bent lead screw. A third arrived, and is it able to print? Not right away. The lead screw was…

Print in Place Hinged Lattice Box – Timelapse

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Hinged & Latticed Storage Box By: Pascal Merkli https://www.thingiverse.com/thing:2912417 Ultimaker 2+ PLA 19hrs 53min X:141 Y:154 Z:89mm .15mm layer / .4mm nozzle 10% Infill / 6.5mm…

3D Printed SunDial by @mojoptix – Time-lapse

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Digital Sundial https://www.thingiverse.com/Mojoptix https://www.thingiverse.com/thing:1068443 Ultimaker 2+ Yellow PLA 28hrs 10mins X:149 Y:163 Z:150mm .1mm layer / .4mm nozzle 20% Infill / 6.5mm retract 210C / 60C…

3D Printed Lego Light Switch – Time-lapse

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Lego Light Switch Cover https://www.thingiverse.com/thing:1190787/ Ultimaker 3 PLA / Breakaway 4hrs 35min X:48 Y:87 Z:90mm .2mm layer / .4mm nozzle 10% Infill / 6.5mm retract 200C…

Cobra Sphere Planter

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Cobra Planter https://www.thingiverse.com/Footmix https://www.thingiverse.com/thing:2795625 Ultimaker 3 Woodfill / PVA 6hrs 10mins X:149 Y:163 Z:150mm .3mm layer / .8mm nozzle 10% Infill / 6.5mm retract 210C /…

3D Printing Crazy Spiral Trivet Coaster Basket Things!

These trivets-turned-baskets are the brainchild of Jason over at Pattern to Print. Printed in Matterhackers green MH BUILD pla on the Prusa i3 mk2. It’s GLORIOUS. I love it. Print your own – it’s on Thingiverse: https://www.thingiverse.com/thing:2854581 Hey, if you’ve read this far, go give…