Fixing a Filament Flow Problem on CR-10 mini, CR-10 or Ender 3

Chuck shows you how to fix filament flow problems on a CR-10, CR-10 Mini and Ender 3. He describes the issue and this shows you the steps he took to get his printer work excellent once again. Filament was not flowing properly and leaving gaps…

Delivering Candy to Kids with RC FPV Car

Links: RC Car: https://goo.gl/JvCuLg Transmitter: https://goo.gl/a9gwRT 3D printer: https://goo.gl/L3MVXA TPU filament: https://goo.gl/4x7kpk Drone: https://goo.gl/6KXGfo FPV screen: https://goo.gl/dpgmb2 Multiswitch: https://goo.gl/zYzEFj Hi internet! I hope this made you smile as much as it made me smile. Even though the idea of delivering candy is silly, the project…

Make Your Own Filament At Home? My Review of the FelFil Evo Filament Extruder

The Felfil Evo filament extruder arrived and I was excited. I have a collection of failed prints and support material I am hoping to grind down and recycle into filament. Would the Felfil Evo fulfill the promise? Find out in my review! Felfil Evo: https://felfil.com…

New Products 3/28/2018 Featuring Adafruit MetroX Classic Kit @adafruit #adafruit

PLA Filament for 3D Printers – 2.85mm Diameter – Clear – 1.0Kg – MeltInk (0:06) https://www.adafruit.com/product/3750?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts PLA Filament for 3D Printers – 2.85mm Diameter – Black – 1.0Kg – MeltInk (0:45) https://www.adafruit.com/product/3751?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit AS7262 6-Channel Visible Light / Color Sensor Breakout (1:06) https://www.adafruit.com/product/3779?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit MetroX…

Rebuilding the Spool Racer using Empty 3D Printing Filament Spools

Spool Racer 2.0 is Rebuilding the Spool Racer using Empty 3D Printing Filament Spools and Better Axles. I used stronger sidewall filament spools and a 1/2″ threaded rod for the axles. The original axles were too small and bent causing the thin wall empty 3D…

Winding a 3D Printing Filament Spool with Junk Drawer Parts

I needed to empty a spool for the Spool Racer but wantd to save the filament. So I used an empty spool and my drill to transfer filament from one spool to an empty spool. Quick and dirty solution using parts from my junk drawer….

First Look at SeeMeCNC Artemis Delta 3D Printer on Filament Friday

Chuck has Jim Carter visit the Filament Friday Workshop and he brings a special surprise, a SeeMeCNC Artemis Delta 3D Printer. The Artemis is a huge printer that can print wirelessly and quietly. Chuck and Jim go through a first look at the SeeMeCNC Artemis…

How to use Tinkercad Sides Features Improvement on an Original 3D Design

Tinkercad has improved over time and the Filament Friday Chess Pawn Design needed to be improved as well. The design was featured in a Filament Friday video from 2015 and hasn’t been changed since. It was even featured in the book Beginner’s Guide to 3D…

New Products 2/21/2018 Featuring Blinka the CircuitPython Enamel Pin! @adafruit #adafruit

PLA Filament for 3D Printers – 2.85mm Diameter – Aqua – 1.0 Kg – MeltInk https://www.adafruit.com/product/3737?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts PLA Filament for 3D Printers – 2.85mm Diameter – Neon Blue – 1Kg – MeltInk https://www.adafruit.com/product/3736?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts PLA Filament for 3D Printers – 2.85mm Dia – Light Green – 1…