Creality Ender 3 Full Review – Best $200 3D Printer!

Creality Ender 3: https://goo.gl/hrpESs This is my review of the new Creality Ender 3 3D printer. It’s a $200 pre-assembled kit that arrives with everything you need to get started. The assembly will take 1 hour, but you will be able to start 3d printing…

Sub $300 CR-10 Mini vs Sub $200 Ender 3

Chuck compares the Creality CR-10 Mini to the Ender 3 3D Printers which are both below $300. He goes over a few of the features he likes and dislikes so you can choose the printer that fits both your budget and your needs to enjoy…

This Was 3D Printed?! – MASSIVE Lithophane

The Creality CR-10 S5 has a build volume of 500x500x500mm, insanely big, and bigger is always better (I’ve heared). I took the time to 3D print a HUGE lithophane, a total printing time of almost 100 hours! The motive of this lithophane was quite special…

The Creality CR-10S and GPL Violations

You asked for it, and you’re gonna get it. In the midst of a controversy surrounding Creality and their violation of the GPL license that they built on, I’m unboxing the 3D printer you all voted on, the 3D printer that’s at the heart of…

Creality 3D, the CR-10 3D Printer, and the GNU GPL Violation #GPLViolation

Creality is in violation of the GNU GPL because it has not released the Marlin changes it has made for the CR-10S 3d printer. GPL FAQ from gnu.org https://www.gnu.org/licenses/gpl-faq.html TH3D Studio video: Scott Lahteine (Marlin) on Patreon: https://www.patreon.com/thinkyhead ==== I use MatterHackers for everything 3D…

$300 Creality CR-10 Mini 3D Printer Problems and Updates Review

Chuck was one of the first to show the low cost $300 Creality CR-10 Mini 3D Printer on YouTube and now takes you through the latest version of the $300 Creality CR-10 Mini 3D Printer for Changes, Updates, and Problems. He reviews each change found…

3D Printing ABS on the CR10? Building a 3D Printer Enclosure with Punished Props

Bill from Punished Props stopped by to help build an enclosure for the Creality CR10 3D Printer. We wanted to print a large ABS print, but with the open design, we first needed an enclosure to keep the heat in and the ambient temperature consistent….