Hi guys, I would so much appreciate if you could take the time to subscribe to the channel. https://www.youtube.com/user/RcLifeOnSimon
Full tutorial video here: https://www.youtube.com/watch?v=Xeb90Nk_6x8
TPU filament: https://goo.gl/6jkERn
The CR-10 is still the best 3d printer: https://goo.gl/QvERnf
Zlatan, ABBA, Avicii and Hulk STL files here: https://www.thingiverse.com/thing:2901628
Erik Lund – Summertime
DJ Quads – Smile
*Settings to tweak if you print with flexible filament on a t-shirt:
-Increase extrusion multiplier slightly.
-Set retraction vertical lift to 1mm.
-Use minimal retraction to avoid jammed extruder.
-Layer height set to 0.2mm.
-Use only solid top/bottom layers (I set mine to at least 3).
-Increase first layer width to 110%.
-No heated bed is necessary. Set nozzle temperature to at least 230.
-Increase the “Global G-Code Offsets” to Z-axis = 0,5mm (this is to account for the thickness of the shirt).
-Add this code “G1 Z10 ; Z up 10mm” to the ending script instead of G28 home all axes (this is to avoid the nozzle resting against the shirt when print is complete).
-Lower speed, I used 20mm/s.