IMAGICLAY.COM

"There are three ways to get something done: do it yourself, hire someone, or forbid your kids to do it."

This Was 3D Printed?! – MASSIVE Lithophane

The Creality CR-10 S5 has a build volume of 500x500x500mm, insanely big, and bigger is always better (I’ve heared). I took the time to 3D print a HUGE lithophane, a total printing time of almost 100 hours! The motive of this lithophane was quite special…

My Tevo Tornado Experience – March MadMess

Will the TEVO Tornado convince me to abandon my CR-10? This 3D printer is marketed as a more hacker friendly 3D printer, but what does that mean for the end user? And what does #TEVOgate mean for TEVO and the future of cheap printers from…

JGAurora A5 David or Goliath? March MadMess

On paper the JGAurora 3D Printer is one to dethrone the CR-10. So what happened? Will we ever have a 3D printer that we could call a home appliance? Should you buy the JGAurora A5 The JGAurora A5 is $426 at Gearbest https://www.gearbest.com/3d-printers-3d-printer-kits/pp_1054909.html?lkid=10972970 or $560…

$300 Creality CR-10 Mini 3D Printer Problems and Updates Review

Chuck was one of the first to show the low cost $300 Creality CR-10 Mini 3D Printer on YouTube and now takes you through the latest version of the $300 Creality CR-10 Mini 3D Printer for Changes, Updates, and Problems. He reviews each change found…

3D Printing ABS on the CR10? Building a 3D Printer Enclosure with Punished Props

Bill from Punished Props stopped by to help build an enclosure for the Creality CR10 3D Printer. We wanted to print a large ABS print, but with the open design, we first needed an enclosure to keep the heat in and the ambient temperature consistent….

CR-10 Mini 3D Printer Bed Leveling Assistant G-Code

Chuck shows you a Simplified 3D Printer Bed leveling assistant for the CR-10 mini using a special G-Code file. The leveling assistant software moves the head so you can easily adjust the bed. All you do is run this special Bed Leveling G-Code file to…

DaVinci 1.0 vs CR-10 Mini – How far we’ve come! – YouTube

Chuck reprints some designs he originally printed on his DaVinci 1.0 but this time on his CR-10 Mini. The results are compared to show how far low-cost printers have come. The CR-10 Mini actually has a larger build area than the Davinci 1.0 allowing the…

CR-10 Mini 3D Printer – Four Simple Modifications – YouTube

Chuck makes some modifications to his CR-10 Mini 3D printer. Each has a purpose and are easy to 3D print and install. He shows you step by step how he updated his CR-10 Mini with these modifications found on Thingiverse. The CR-10 Mini is a…

Copyright © 2018 IMAGICLAY.COM