IMAGICLAY.COM

"There are three ways to get something done: do it yourself, hire someone, or forbid your kids to do it."

SUSPENSION! – 3D PRINTED TANK #3

Per popular request I had to put suspension on the tank, and it looks awesome!! I had to figure out a suspension mechanism for the lower rollers and a tensioning system for the back idler. It has been a great week full of improvements but…

TANK TRACKS – 3D PRINTED TANK #1

I’ve finally started the tracked vehicle project! This week I had to be out in a trip for two days so not much time to work on the video but I’m already printing a massive amount of parts for next week video. I’m planning (not…

DIY BIG CLOCK – USB POWERED NIST SERVER TIME KEEPING

This week needed more time, so I made a clock! This one has a modular design and has been made so it can be printed on almost any printer. All the files and info necessary to make one for yourself can be found here: https://www.ivanmiranda.com/diy-big-digital-clock…

THRUST TEST

An attempt at a thrust test this week with controversial results… You can find the new T-Shirts and hoodies here: https://www.bonfire.com/this-is-not-a-hammer/ All the cool things that Bangood sent me for this project: ZOP Power 22.2V 6200mAh 6S 45C Lipo Battery — https://goo.gl/RdFXCb Emax AVAN-R 5065…

HANDHELD SELF PROPELLING SYSTEM #1

You can find the new T-Shirts and hoodies here: https://www.bonfire.com/this-is-not-a-hammer/ All the cool things that Bangood sent me for this project: ZOP Power 22.2V 6200mAh 6S 45C Lipo Battery — https://goo.gl/RdFXCb Emax AVAN-R 5065 Propeller — https://goo.gl/KCgonn EK2-0907 Updated Servo Tester Server — https://goo.gl/N4A4MK 4X…

SCREW DRIVE RC TANK #7 Q&A

As promised in the last video here I leave you some of your questions answered, sorry I did not have time to answer all of them and thanks a lot for your support!! If you want to send me something: https://www.ivanmiranda.com/about-1/ Joel Telling – The…

SCREW DRIVE RC TANK #5 IT WORKS!!!

Well, it finally works, ya’ll told me to never give up and this is the result. I basically increased the tolerances and gave me more space to fasten everything, added a few washers and in the last minute (literally) I had to add to wooden…

Copyright © 2018 IMAGICLAY.COM